Compare the best products from Amazon in the easiest way

Software assessment: Infinity COP-200 coping sled

Article Image
Coping sled by Infinity Fashions COP-200 and COP-201 Cozy, $220–260

I’ve made tons of of cope-and-stick cupboard doorways. The cope minimize is hard, partly as a result of the minimize is cross-grain, however extra so as a result of the ends of the rails are sometimes solely 2 in. to three in. large. Issues can go improper when you find yourself supporting the rails whereas passing their brief ends throughout the router bit, as a result of the workpiece can tip into the opening within the fence, ruining the workpiece and bringing your palms shortly and dangerously towards the bit. The answer is to carry the rails securely on a sled along with your palms a secure distance away.

Infinity has two new sleds that just do this, the COP-200 and the COP-201. The primary makes use of commonplace toggle clamps, and the second self-adjusting toggle clamps. I examined the 201, which labored nice on my router desk. With a 38-in.-thick anodized aluminum base plate and 34-in.-thick purple aluminum assist blocks, the unit is nicely engineered and weighs in at virtually 8 lb. Its heft is vital to minimizing chatter. The sled has two handles, and three metal toggle clamps that maintain your backer block and workpiece firmly in opposition to the sled—two clamps on the mounted assist block, and one on the movable block.

A 38-in.-thick clear polycarbonate visor is the reference edge for the sled. It extends past the bottom and rides in opposition to the router desk fence. This implies the bottom itself isn’t in opposition to the fence or near the bit. The visor has two units of mounting holes, permitting you to set it up for deeper or shallower cuts.

Cope and stick are minimize on the router desk, however this sled works nicely on the tablesaw too, the place you may put it to make use of for different joinery.

The match and end of the Infinity COP-201 components are very clear and exact, and meeting was a breeze. One concern is the small, undesirable play within the visor mounting holes for the reason that fringe of the visor must be sq. to the rear base block. It’s a straightforward, one-time repair although, with a squared workpiece within the sled everytime you transfer the visor.

Infinity sells a metal miter bar ($20) to make use of the sled in a miter slot. Optionally available setup blocks ($10) assist you to dial within the bit top whereas accounting for the thickness of the sled’s base.

Quick clamping. Three toggle clamps hold your workpiece and any backer block efficiently and effectively. In addition, one fence is movable, allowing you to secure pieces across their width.
Fast clamping. Three toggle clamps maintain your workpiece and any backer block effectively and successfully. As well as, one fence is movable, permitting you to safe items throughout their width.

Safe to use. The visor rides against the router table’s fence, and its length means there’s little chance of the sled and work dangerously pivoting into any fence opening. The two handles keep your hands far from the bit.
Secure to make use of. The visor rides in opposition to the router desk’s fence, and its size means there’s little likelihood of the sled and work dangerously pivoting into any fence opening. The 2 handles preserve your palms removed from the bit.

Tenons too. The coping sled can also be used for routing tenons, and for molding or shaping workpieces too small to hold safely by hand
Tenons too. The coping sled will also be used for routing tenons, and for molding or shaping workpieces too small to carry safely by hand.

—Tony O’Malley is an expert cabinetmaker in Emmaus, Pa.

Pictures: Barry NM Dima

From Nice Woodworking #293

Join eletters in the present day and get the most recent methods and how-to from Nice Woodworking, plus particular provides.

Get woodworking suggestions, professional recommendation and particular provides in your inbox


We will be happy to hear your thoughts

Leave a reply

Translate »
The Regular Person
Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart