Straw marquetry is a masterful veneering method that has been used for hundreds of years to brighten furnishings. After it has been break up, dried, and flattened, rye or wheat straw is historically utilized to wooden surfaces with varied instruments to create distinctive patterns. Right here, Gerard Williams skillfully demonstrates the method of making use of straw marquetry, step-by-step.
Utilizing a thumbnail or a really skinny knife, the straw should first be break up from one finish to the opposite, then soaked completely and dried in a single day. To make sure that the straw is dry sufficient, open it barely and slide your thumb alongside the size of the strip to provide a cracking sound. It’s important that every one the straw items are utterly dried by means of, in any other case they are going to fold outward after you proceed to work with them.
A veneer hammer is right for flattening the strips. With the correct amount of stress, the straw fibers will compress and lay flat when utilized to the substrate. Press firmly on each side repeatedly till the strip turns into a ribbon.
Although this can be a prolonged and methodical course of, the strips have to be flattened and veneered one after the other. Fortuitously, the method will grow to be more and more environment friendly with every fastidiously positioned strip. For such a hanging visible type, this course of really proves to be rather more tactile, reliant on the slim strips slotting collectively. In the event you can’t really feel the strips locking into place as you apply them, likelihood is the top piece will probably be inaccurate. For that cause, this repeated step is maybe probably the most meticulous, however the finish product is value it.